Sony Handycam DCR-PC105 Operating Instructions Manual page 93

Dubbing only desired scenes – Digital program editing (on tape)
(10) Press
2
V I DEO ED I T
ED I T SET
CONTROL
ADJ TEST
"CUT - I N"
"CUT -OUT"
I R SETUP
PAUSEMODE
I R TEST
6
V I DEO ED I T
ED I T SET
CONTROL
ADJ TEST
"CUT - I N"
"CUT -OUT"
I R SETUP
PAUSEMODE
I R TEST
To return to FN
Press END to return to PAGE1, then press EXIT.
Notes
•The image to adjust the synchronization is recorded for about 50 seconds.
•If you start recording from the very beginning of the tape, the first few seconds of the
tape may not be recorded properly. Be sure to allow about 10 seconds' lead before
starting the recording.
•When the recording unit cannot be operated properly by the i.LINK cable, leave the
connection as it is, and make the A/V connecting cable settings (p. 88). Video and
audio are sent by digital signals.
RET. to execute.
END
RETURN
EXECUTE
ENGAGE
REC PAUSE
EXEC RET.
END
0
EXEC RET.
3
END
V I DEO ED I T
ED I T SET
CONTROL
ADJ TEST COMPLETE
"CUT - I N"
"CUT -OUT"
I R SETUP
PAUSEMODE
I R TEST
EXEC RET.
8
END
V I DEO ED I T
ED I T SET
CONTROL
ADJ TEST
"CUT - I N"
"CUT -OUT" 0
I R SETUP
PAUSEMODE
I R TEST
EXEC RET.
93