Sony Handycam DCR-PC105 Operating Instructions Manual page 117

Selecting image quality and size
Selecting the still image size
You can select either image size 1152 × 864 or 640 × 480 (When the POWER switch is set
to CAMERA or VCR, the image size is automatically set to 640 × 480.)
The default setting is 1152 × 864.
The POWER switch should be set to
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU.
(3) Select STILL SET in
(4) Select IMAGESIZE, then press EXEC.
(5) Select the desired image size, then press EXEC.
The indicator changes as follows:
1152
3
Memory capacity of still images
Recorded images are compressed in JPEG format before being stored in memory. The
memory capacity of still images varies depending on the selected image quality mode
and image size. Details are shown in the table below.
1152 × 864 image size
Image quality
FINE
STANDARD
640 × 480 image size
Image quality
FINE
STANDARD
, then press EXEC.
640
MEM SET 1
EXIT
STILL SET
OFF
BURST
QUALITY
IMAGESIZE
r R EXEC RET.
Memory capacity
About 500 kB
About 200 kB
Memory capacity
About 150 kB
About 60 kB
.
4
MEM SET 1
EXIT
1152
STILL SET
BURST
QUALITY
1152 × 864
IMAGESIZE
640 × 480
REMAIN
12
r R
EXEC RET.
117