Sony Handycam DCR-PC105 Operating Instructions Manual page 124

Recording a still image on a "Memory Stick"
– Memory photo recording
Recording images with the flash
In a dark place, the flash automatically pops up to strobe. The default setting is auto (no
indicator). To change the flash mode, press
indicator appears on the screen. You cannot use this function for recording moving
pictures.
The POWER switch should be set to
Each press of
When you set RED EYE R in
follows:
Forced flash:
The flash fires regardless of the surrounding brightness.
Auto red-eye reduction:
The flash fires before recording to reduce red-eye.
Forced red-eye reduction:
The flash fires before recording to reduce red-eye, regardless of the surrounding
brightness.
No flash:
The flash does not fire.
The amount of flash is automatically adjusted to the appropriate brightness. You can
also change FLASH LVL to the desired brightness in
HIGH is selected, " +" appears in the screen. When LOW is selected, " –" appears.
Try recording various images to find the most appropriate setting for FLASH LVL.
124
Flash lamp
(flash) button
(flash) changes the indicator as follows:
t t AUTO (No indicator)
t t
(flash) repeatedly until the flash mode
or
to ON in the menu settings, the indicator changes as
.
in the menu settings. When