Selecting image quality and size
Selecting still image quality
The default setting is FINE.
The POWER switch should be set to
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU.
(3) Select STILL SET in
(4) Select QUALITY, then press EXEC.
(5) Select the desired image quality, then press EXEC.
Image quality settings
Setting
FINE (FINE)
STANDARD (STD)
To return to FN
Press EXIT.
116
, then press EXEC.
3
MEM SET 1
EXIT
STILL SET
BURST
OFF
QUALITY
IMAGESIZE
EXEC
RET.
Meaning
Use this mode when you want to record high quality
images. Fine images are compressed to about 1/4.
This is the standard image quality. Standard images are
compressed to about 1/10.
or
.
4
MEM SET 1
EXIT
STILL SET
BURST
QUALITY
FINE
IMAGESIZE
STANDARD
REMAIN
12
EXEC
RET.