Adjusting The White Balance Manually - Sony Handycam DCR-PC105 Operating Instructions Manual

Adjusting the white balance manually

Normally white balance is automatically adjusted.
The POWER switch should be set to
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU.
(3) Select WHT BAL in
(4) Select the desired mode, then press EXEC.
HOLD:
When recording a single-colored subject or background
OUTDOOR (
•When recording a sunset/sunrise, just after sunset, just before sunrise, neon signs, or
fireworks
•Under daylight fluorescent lamps
INDOOR (n):
•When lighting conditions change quickly
•In too bright places such as photography studios
•Under sodium lamps or mercury lamps
To return to FN
Press EXIT.
To return to the automatic white balance
Set WHT BAL to AUTO in the menu settings.
, then press EXEC (p. 192).
MANUAL SET
PROGRAM AE
P EFFECT
RED EYE R
FLASH LVL
WHT BAL
AUTO SHTR
):
or
EXIT
AUTO
HOLD
OUTDOOR
INDOOR
EXEC RET.
.
53