Step 3 Setting The Date And Time - Sony Handycam DCR-PC105 Operating Instructions Manual

Step 3 Setting the date and time

Set the date and time when you use your camcorder for the first time. The "CLOCK
SET" indicator will appear each time you set the POWER switch to CAMERA or
MEMORY unless you set the date and time.
If you do not set the date and time, "--- -- ----" and "--:--:--" are recorded on a tape or a
"Memory Stick" as the data code.
If you do not use your camcorder for about 3 months, the date and time settings may
be unset (bars may appear) because the built-in rechargeable battery installed in your
camcorder will have been discharged (p. 223). In this case, charge the built-in
rechargeable battery, then set the year, the month, the day, the hour and the minute.
(1) Set the POWER switch to CAMERA or MEMORY.
(2) Press OPEN to open the LCD panel.
(3) Press FN (Function) to display PAGE1 (p. 25).
(4) Press MENU to display the menu.
(5) Press r/R to select
(6) Press r/R to select CLOCK SET, then press EXEC.
(7) Press r/R to select the desired year, then press EXEC.
(8) Set the month, day and hour with the same procedure as step 7.
(9) Press r/R to set the minute, then press EXEC by the time signal. The clock
starts.
3
FN
, then press EXEC.
5
SETUP MENU
CLOCK SET
USB STREAM
LANGUAGE
DEMO MODE
7
SETUP MENU
CLOCK SET
USB STREAM
LANGUAGE
DEMO MODE
9
SETUP MENU
CLOCK SET
USB STREAM
LANGUAGE
DEMO MODE
6
EXIT
SETUP MENU
– – : – – : – –
CLOCK SET
USB STREAM
LANGUAGE
DEMO MODE
EXEC RET.
8
EXIT
SETUP MENU
CLOCK SET
USB STREAM
2003 JAN 1
LANGUAGE
DEMO MODE
12 00 AM
EXEC RET.
EXIT
SETUP MENU
CLOCK SET
USB STREAM
2003 JUL 4
LANGUAGE
DEMO MODE
5 30 PM
EXEC RET.
EXIT
2003 JAN 1
12 00 AM
EXEC RET.
EXIT
2003 J U L 4
5 00 PM
EXEC RET.
EXIT
JUL 4 2003
5:30:20
PM
EXEC RET.
23