Step 4 Using the touch panel
Your camcorder has operation buttons on the LCD screen.
Touch the LCD screen directly with your finger to operate each function.
(1) Set the POWER switch to CAMERA for recording, VCR for playback, or
MEMORY to use a "Memory Stick."
(2) Press OPEN to open the LCD panel.
(3) Press FN. Operation buttons on PAGE1 are displayed on the LCD screen.
If FN is not on the LCD screen, touch the LCD screen lightly to make it appear.
You can control the display with DISPLAY/BATT INFO on your camcorder.
(4) Press PAGE2/PAGE3 to display PAGE2/PAGE3. Operation buttons on
PAGE2/PAGE3 are displayed on the LCD screen.
(5) Press the desired operation item. See relevant pages of this manual for each
function.
3
When the POWER switch is set
to CAMERA
To return to FN
Press EXIT.
To execute settings
Press
OK. The display returns to PAGE1/PAGE2/PAGE3.
PAGE1
PAGE2 PAGE3 EXIT
SPOT
SPOT
METER
FOCUS
MENU
FADER
END
EXPO-
SCH
SURE
2
DISPLAY/BATT INFO
1
25