Sony Handycam DCR-PC105 Operating Instructions Manual page 200

Changing the menu settings
Icon/item
OTHERS
WORLD TIME
BEEP
COMMANDER
DISPLAY
REC LAMP
VIDEO EDIT
Note
If you press DISPLAY/BATT INFO with DISPLAY set to V-OUT/LCD in the menu
settings, the picture from a TV or VCR will not appear on the LCD screen even when
your camcorder is connected to the output jacks on the TV or VCR.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of your
camcorder may reflect on the subject if it is close. In this case, we recommend you set
REC LAMP to OFF.
After 5 minutes of removing the power source
The PROGRAM AE, FLASH LVL, AUDIO MIX, WHT BAL, HiFi SOUND and
COMMANDER items are returned to their default settings.
Other menu items are held in memory even when the power source is removed.
200
Mode Meaning
—— To set the clock to the local time. Press r/R to set
a time difference. The clock changes by the time
difference you set here. If you set the time
difference to 0, the clock returns to the originally
set time.
z MELODY To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder
NORMAL To output the beep instead of the melody
OFF To cancel melody, the beep sound and shutter
sound
z ON To activate the Remote Commander supplied
with your camcorder
OFF To deactivate the Remote Commander to avoid
erroneous remote control operation caused by
other VCR's remote control
z LCD To show the display on the LCD screen and
viewfinder
V-OUT/LCD To show the display on the TV screen, LCD
screen and viewfinder
z ON To light up the camera recording lamp at the
front of your camcorder
OFF To turn the camera recording lamp off so that the
person is not aware of the recording
z RETURN To cancel Digital program editing
TAPE To make programs and perform Digital program
editing on the tape (p. 87)
MEMORY To make programs and perform Digital program
editing on the "Memory Stick" (p. 139)
POWER
switch