Step 1 Preparing The Power Source; Installing The Battery Pack - Sony Handycam DCR-PC105 Operating Instructions Manual

Step 1 Preparing the power source

Installing the battery pack

Be sure to set the POWER switch to OFF (CHG) when replacing the battery pack.
(1) While sliding the BATT (battery) release lever in the direction of the arrow 1,
slide the battery terminal cover in the direction of the arrow 2.
(2) Slide the battery pack down until it clicks.
1 2
2
1
BATT release lever
To remove the battery pack
Remove the battery pack while sliding the BATT (battery) release lever.
15