Sony Handycam DCR-PC105 Operating Instructions Manual page 165

Connecting your camcorder to a computer using the USB cable
(For Windows users)
(3) Select "Handycam" on the screen.
The title screen appears.
(4) Move the cursor to "USB Driver" and click. This starts USB driver installation.
(5) Follow the on-screen messages to install the USB driver.
(6) Remove the CD-ROM, then restart the computer and follow the on-screen
messages.
Notes
•If you connect the USB cable before USB driver installation is complete, the USB driver
will not be properly registered. Carry out installation again following the on-screen
messages.
•The title screen is not displayed if the screen size of the computer is set to less than
800 × 600 dots and 256 colors or less. See pages 163 and 164 about the recommended
computer environment.
Click
Click
165