Sony Handycam DCR-PC105 Operating Instructions Manual page 140

Recording edited pictures from a tape as a moving picture
– Digital program editing (on a "Memory Stick")
Notes
•You cannot dub the titles, display indicators, or the contents of Cassette Memory.
•You cannot operate recording during the Digital program editing on the "Memory
Stick."
On a blank portion of the tape
You cannot set IN or OUT on a blank portion of the tape.
If there is a blank portion between IN and OUT on the tape
The total time may not appear correctly.
While making a program
If you eject the cassette, the NOT READY indicator appears on the screen. The program
will be erased.
Performing the program (Dubbing onto a "Memory Stick")
The POWER switch should be set to
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU.
(3) Select VIDEO EDIT in
(4) Select MEMORY, then press EXEC.
(5) Press START.
(6) Press EXEC.
Your camcorder searches for the beginning of the first program, then starts
dubbing.
The program mark flashes.
The SEARCH indicator appears during searching, the EDITING indicator
appears during writing of data on your camcorder, and the REC indicator
appears during dubbing on the screen.
When the dubbing ends, your camcorder automatically stops.
To stop dubbing
Press CANCEL.
The program you made is recorded on the "Memory Stick" up to the place where you
pressed CANCEL.
To end Digital program editing
Your camcorder stops when the dubbing ends. Then the display returns to VIDEO
EDIT in the menu settings.
Press
140
, then press EXEC.
END to end Digital program editing.
.