Pre-Delivery Preparation - Genie S-100 Service Manual

Pre-Deliver Pre-Deliver
Pre-Deliver y Preparation
Pre-Deliver Pre-Deliver
Fundamentals
It is the responsibility of the dealer to perform the

Pre-delivery Preparation.

The Pre-delivery Preparation is performed prior to each
delivery. The inspection is designed to discover if
anything is apparently wrong with a machine before it is
put into service.
A damaged or modified machine must never be used. If
damage or any variation from factory delivered condition
is discovered, the machine must be tagged and removed
from service.
Repairs to the machine may only be made by a qualified
service technician, according to the manufacturer's
specifications.
Scheduled maintenance inspections shall be performed
by qualified service technicians, according to the
manufacturer's specifications and the requirements listed
in the responsibilities manual.
Genie Industries USA
18340 NE 76th Street
PO Box 97030
Redmond, WA 98073-9730
(425) 881-1800
Copyright © 2002 by Genie Industries. Genie® is a registered trademark of Genie Industries.
Rev B
y Preparation y Preparation
y Preparation
y Preparation
The Maltings, Wharf Road
Grantham, Lincolnshire
NG31- 6BH England
(44) 1476-584333
Instructions
Use the operator's manual on your machine.
The Pre-delivery Preparation consists of completing the
Pre-operation Inspection, the Maintenance items and the
Function Tests.
Use this form to record the results. Place a check in the
appropriate box after each part is completed. Follow the
instructions in the operator's manual.
If any inspection receives an N, remove the machine
from service, repair and re-inspect it. After repair, place a
check in the R box.
Legend
Y = yes, completed
N = no, unable to complete
R = repaired
Comments
Pre-Delivery Preparation
Pre-operation inspection completed
Maintenance items completed
Function tests completed
Model
Serial number
Date
Machine owner
Inspected by (print)
Inspector signature
Inspector title
Inspector company
Genie UK
Y N R