The Reset Button - ZyXEL Communications MAX-207HW2 User Manual

Chapter 2 Introducing the Web Configurator
A login screen displays.
4
Password ( 密碼 ) (284wj/6), and then click Login ( 登入 ).
Figure 5 Password Screen
The following screen displays if you have not yet changed your password. It is
5
highly recommended you change the default password. Enter a new password,
retype it to confirm and click Apply ( 套用 ); alternatively click Ignore ( 忽略 ) to
proceed to the main menu if you do not want to change the password now.
Figure 6 Change Password Screen

2.1.2 The Reset Button

If you forget your password or cannot access the web configurator, you will need
to use the Reset button to reload the factory-default configuration file. This
means that you will lose all configurations that you had previously and the
password will be reset to "284wj/6".
2.1.2.1 Using The Reset Button
Make sure the Power light is on (not blinking).
1
To set the device back to the factory default settings, press the Reset button for
2
ten seconds or until the Power light begins to blink and then release it. When the
Power light begins to blink, the defaults have been restored and the device
restarts.
Reconfigure the WiMAX Modem following the steps in your Quick Start Guide.
3
24
Enter the default User Name ( 使用者名稱 ) (@dmin) and
User's Guide