Wimax Configuration - ZyXEL Communications MAX-207HW2 User Manual

Chapter 7 The WAN Configuration Screens
Table 25 ADVANCED ( 進階 ) > WAN Configuration (WAN 設定 ) > Internet
Connection > ISP Parameters for Internet Access () (continued)
LABEL
Use Fixed IP
Address ( 使用固
定 IP 位址 )
IP Subnet Mask
(IP 子網路遮罩 )
Gateway IP
Address ( 閘道 IP
位址 )
Apply ( 套用 )
Reset ( 重設 )

7.3 WiMAX Configuration

Click ADVANCED ( 進階 ) > WAN Configuration (WAN 設定 ) > WiMAX
Configuration to set up the frequencies used by your WiMAX Modem.
In a WiMAX network, a mobile or subscriber station must use a radio frequency
supported by the base station to communicate. When the WiMAX Modem looks for
a connection to a base station, it can search a range of frequencies.
82
DESCRIPTION
A static IP address is a fixed IP that your ISP gives you. Type your
ISP assigned IP address in the IP Address (IP 位址 ) field below.
Enter a subnet mask in dotted decimal notation.
Refer to the appendices to calculate a subnet mask If you are
implementing subnetting.
Specify a gateway IP address (supplied by your ISP).
Click to save your changes.
Click to restore your previously saved settings.
User's Guide