Speed Dial Setup - ZyXEL Communications MAX-207HW2 User Manual

Table 51 VOICE > Phone Book > Speed Dial
LABEL
Clear ( 清除 )
Reset ( 重設 )

12.3.1 Speed Dial Setup

Click the Edit icon of an entry in the VOICE > Phone Book > Speed Dial screen
to open the following screen. Use this screen to configure a speed dial entry.
Figure 58 VOICE > Phone Book > Speed Dial > Edit
The following table describes the labels in this screen.
Table 52 VOICE > Phone Book > Speed Dial > Edit
LABEL
Speed Dial
Number
Name
Type
Apply ( 套用 )
Cancel ( 取消 )
User's Guide
DESCRIPTION
Click to clear all fields on the screen and begin anew.
Click to restore your previously saved settings.
DESCRIPTION
Select the speed-dial number you want to use for this phone number.
Enter the SIP number you want the WiMAX Modem to call when you dial
the speed-dial number.
Enter a name to identify the party you call when you dial the speed-dial
number. You can use up to 127 printable ASCII characters.
Select Use Proxy if you want to use one of your SIP accounts to call
this phone number.
Select Non-Proxy (Use IP or URL) if you want to use a different SIP
server or if you want to make a peer-to-peer call. In this case, enter the
IP address or domain name of the SIP server or the other party in the
field below.
Click to save your changes.
Click to return to the previous screen without saving your changes.
Chapter 12 The Phone Book Screens
141