ZyAIR B-1000 Wireless LAN Access Point
Top Panel and Connections
CONNECTION
POWER 12VDC
RESET
ETHERNET
Use only the supplied power adapter!
Using the RESET Button
Step 1.
Use a pointed object to press the RESET button for 5-15 seconds (the
LINK LED flashes from green to red), then release it.
Step 2.
If the LINK LED turns green within 30 seconds, the factory defaults
have been restored and the ZyAIR restarts. Otherwise, go to step 3.
Step 3.
Turn the ZyAIR off.
Step 4.
While pressing the RESET button, turn the ZyAIR on.
Step 5.
Continue to hold the RESET button for about 30 seconds, then. ZyAIR
restarts.
Step 6.
Release the RESET button Wait about ten seconds (or until the LINK
LED turns green) for the ZyAIR to finish restarting.
8
Hardware Connections
DESCRIPTION AND FUNCTION
This supplies the power to the unit. Connect the supplied
power adaptor to the wall outlet and insert the small plug from
the power adaptor to this socket.
This button resets the unit.
This auto-sensing Ethernet port is used to connect the ZyAIR
to a local management computer or to an external hub. This
port is auto-sensing. This means that these ports
automatically adjust according to the type of cable, for
example, straight-through Ethernet cable or crossover
Ethernet cable.
Warning!