Leds; The Wps/Reset Button - ZyXEL Communications WAP3205 User Manual

1.3 L EDs
Front Panel
Fig ure 2
The following table describes the LEDs and the WPS button.
Table 1 Front Panel LEDs and WPS Button
L ED
POWER
WLAN 2.4G
Ethernet
WPS
1.4 T he WPS/ RESET Butto n
Your WAP3205 v3 supports WiFi Protected Setup (WPS), which is an easy way to set up a secure wireless
network. WPS is an industry standard specification, defined by the Wi-Fi Alliance.
WPS allows you to quickly set up a wireless network with strong security, without having to configure
security settings manually. Each WPS connection works between two devices. Both devices must
support WPS (check each device's documentation to make sure).
Chapter 1 Introduction
C O L O R ST AT US
Green On
Off
Green On
Blinking
Off
Green On
Off
Green On
Blinking
Off
WAP3205 v3 User's Guide
DESC RIPT IO N
The WAP3205 v3 is receiving power and functioning properly.
The WAP3205 v3 is not receiving power.
The WAP3205 v3 is ready, but is not sending/receiving data through the
wireless LAN.
The WAP3205 v3 is sending/receiving data through the wireless LAN.
The WAP3205 v3 is negotiating a WPS connection with a wireless client.
The wireless LAN is not ready or has failed.
The WAP3205 v3 LAN port (any of 5 ports) is connected with a router or
client device.
The WAP3205 v3 LAN port (any of 5 ports) is not connected with a
router or client device.
WPS status is configured.
The WAP3205 v3 is negotiating a WPS connection with a wireless client.
The WPS status is not configured or disabled.
11