Mbssid - ZyXEL Communications MAX-207HW2 User Manual

Wimax mimo indoor simple cpe 2.5 ghz
Table of Contents

Advertisement

The types of encryption you can choose depend on the type of authentication.
(See
Section 6.4.2.3 on page 72
Table 24 Types of Encryption for Each Type of Authentication
Weakest
Strongest
For example, if the wireless network has a RADIUS server, you can choose WPA
or WPA2. If users do not log in to the wireless network, you can choose no
encryption, Static WEP, WPA-PSK, or WPA2-PSK.
Usually, you should set up the strongest encryption that every device in the
wireless network supports. For example, suppose you have a wireless network
with the WiMAX Modem and you do not have a RADIUS server. Therefore, there is
no authentication. Suppose the wireless network has two devices. Device A only
supports WEP, and device B supports WEP and WPA. Therefore, you should set up
Static WEP in the wireless network.
Note: It is recommended that wireless networks use WPA-PSK, WPA, or stronger
encryption. The other types of encryption are better than none at all, but it is still
possible for unauthorized wireless devices to figure out the original information
pretty quickly.
When you select WPA2 or WPA2-PSK in your WiMAX Modem, you can also select
an option (WPA compatible) to support WPA as well. In this case, if some of the
devices support WPA and some support WPA2, you should set up WPA2-PSK or
WPA2 (depending on the type of wireless network login) and select the WPA
compatible option in the WiMAX Modem.
Many types of encryption use a key to protect the information in the wireless
network. The longer the key, the stronger the encryption. Every device in the
wireless network must have the same key.

6.4.3 MBSSID

Traditionally, you needed to use different APs to configure different Basic Service
Sets (BSSs). As well as the cost of buying extra APs, there was also the possibility
of channel interference. The WiMAX Modem's MBSSID (Multiple Basic Service Set
IDentifier) function allows you to use one access point to provide several BSSs
simultaneously. You can then assign varying QoS priorities and/or security modes
to different SSIDs.
User's Guide
for information about this.)
NO AUTHENTICATION RADIUS SERVER
No Security
Static WEP
WPA-PSK
WPA2-PSK
Chapter 6 The WIFI Configuration Screen
WPA
WPA2
73

Advertisement

Table of Contents
loading

Table of Contents