Wimax Modem Hardware; Leds - ZyXEL Communications MAX-207HW2 User Manual

1.2 WiMAX Modem Hardware

Follow the instructions in the Quick Start Guide to make hardware connections.

1.2.1 LEDs

The following figure shows the LEDs (lights) on the WiMAX Modem.
Figure 4 The WiMAX Modem's LEDs
The following table describes your WiMAX Modem's LEDs (from right to left).
Table 2 The WiMAX Modem
LED
Power
WiMAN Link
User's Guide
POWER
LED
WIMAX
LINK
SIGNAL
STRENGTH
INDICATORS
VOICE
LEDS
1 & 2
WLAN
LED
STATE DESCRIPTION
Off The WiMAX Modem is not receiving power.
Red The WiMAX Modem is receiving power but has been
unable to start up correctly or is not receiving
enough power. See the Troubleshooting section for
more information.
Green The WiMAX Modem is receiving power and
functioning correctly.
Off The WiMAX Modem is not connected to a wireless
(WiMAX) network.
Green The WiMAX Modem is successfully connected to a
wireless (WiMAX) network.
Green (Blinking The WiMAX Modem is searching for a wireless
Slowly) (WiMAX) network.
Green (Blinking The WiMAX Modem has found a wireless (WiMAX)
Quickly) network and is connecting.
Chapter 1 Getting Started
21