ZyXEL Communications MAX-207HW2 User Manual page 100

Note: If you have a private WAN IP address, then you cannot use Dynamic DNS.
Click ADVANCED ( 進階 ) > System Configuration ( 系統組態 ) > Dynamic DNS
to set up the WiMAX Modem as a dynamic DNS client.
Figure 40 ADVANCED ( 進階 ) > System Configuration ( 系統組態 ) > Dynamic DNS
The following table describes the labels in this screen.
Table 34 ADVANCED ( 進階 ) > System Configuration ( 系統組態 ) > Dynamic DNS
LABEL
Dynamic DNS Setup ( 動態 DNS 設定 )
Enable Dynamic
DNS ( 啟用動態
DNS)
Service
Provider ( 服務供
應商 )
Dynamic DNS
Type ( 動態 DNS
類型 )
Host Name ( 主
機名稱 )
User Name ( 使
用者名稱 )
Password (密碼) Enter the password assigned to you.
Enable Wildcard
Option (啟用萬用
字元選項 )
Enable offline
option ( 啟用離線
選項 )( 只限於自
訂 DNS)
User's Guide
DESCRIPTION
Select this to use dynamic DNS.
Select the name of your Dynamic DNS service provider.
Select the type of service that you are registered for from your Dynamic
DNS service provider.
Enter the host name. You can specify up to two host names, separated
by a comma (",").
Enter your user name.
Select this to enable the DynDNS Wildcard feature.
This field is available when CustomDNS ( 自訂 DNS) is selected in the
DDNS Type ( 動態 DNS 類型 ) field. Select this if your Dynamic DNS
service provider redirects traffic to a URL that you can specify while you
are off line. Check with your Dynamic DNS service provider.
Chapter 9 The System Configuration Screens
101