ZyXEL Communications MAX-207HW2 User Manual page 138

Table 49 VOICE > Phone Book > Incoming Call Policy
LABEL
#
Activate
Incoming Call
Number
Forward to
Number
Condition
Apply
Reset
Note: The WiMAX Modem checks the Advanced rules first before checking the
Forward to Number rules. All rules are checked in order from top to bottom.
User's Guide
DESCRIPTION
The number of the item in this list.
Select this to enable this rule. Clear this to disable this rule.
Enter the phone number to which this rule applies.
Enter the phone number to which you want to forward incoming calls
from the Incoming Call Number. You may leave this field blank,
depending on the Condition.
Select the situations in which you want to forward incoming calls from
the Incoming Call Number, or select an alternative action.
• Unconditional - The WiMAX Modem immediately forwards any calls
from the Incoming Call Number to the Forward to Number.
• Busy - The WiMAX Modem forwards any calls from the Incoming
Call Number to the Forward to Number when your SIP account
already has a call connected.
• No Answer - The WiMAX Modem forwards any calls from the
Incoming Call Number to the Forward to Number when the call
is unanswered. (See No Answer Waiting Time.)
• Block - The WiMAX Modem rejects calls from the Incoming Call
Number.
• Accept - The WiMAX Modem allows calls from the Incoming Call
Number. You might create a rule with this condition if you do not
want incoming calls from someone to be forwarded by rules in the
Forward to Number section.
Click to save your changes.
Click to restore your previously saved settings.
Chapter 12 The Phone Book Screens
139