ZyXEL Communications MAX-207HW2 User Manual page 63

Chapter 6 The WIFI Configuration Screen
Click Advanced (進階) > WIFI Configuration (WIFI設定) to open the General
screen.
Figure 19 Advanced ( 進階 ) > WIFI Configuration (WIFI 設定 ) > General
The following table describes the labels in this screen.
Table 18 Advanced ( 進階 ) > WIFI Configuration (WIFI 設定 ) > General
LABEL
Active
Wireless LAN
( 啟用無線區域
網路 )
Network
Name (SSID)
( 名稱 )
Hide SSID (
隱藏 SSID)
Channel
Selection ( 頻
道選擇 )
Security
Mode ( 安全模
式 )
Apply ( 套用 )
64
DESCRIPTION
Click the check box to activate wireless LAN.
The SSID (Service Set IDentity) identifies the service set with which a
wireless device is associated. Wireless devices associating to the access
point (AP) must have the same SSID. Enter a descriptive name (up to 32
printable 7-bit ASCII characters) for the wireless LAN.
Note: If you are configuring the WiMAX Modem from a computer
connected to the wireless LAN and you change the WiMAX
Modem's SSID or WEP settings, you will lose your wireless
connection when you press Apply ( 套用 ) to confirm. You must
then change the wireless settings of your computer to match
the WiMAX Modem's new settings.
Select this check box to hide the SSID in the outgoing beacon frame so a
station cannot obtain the SSID through scanning using a site survey tool.
Select this option and set the operating frequency/channel depending on
your particular region. Select a channel from the drop-down list box.
See the following sections for more details about this field.
Click Apply ( 套用 ) to save your changes back to the WiMAX Modem.
User's Guide