Qos - ZyXEL Communications MAX-207HW2 User Manual

Use the following steps if you would like to create new tones or change your
tones:
Pick up the phone and press **** on your phone's keypad and wait for the
1
message that says you are in the configuration menu.
Press a number from 1101~1108 on your phone followed by the # key.
2
Play your desired music or voice recording into the receiver's mouthpiece. Press
3
the # key.
You can continue to add, listen to, or delete tones, or you can hang up the receiver
4
when you are done.
Do the following to listen to a custom tone:
Pick up the phone and press **** on your phone's keypad and wait for the
1
message that says you are in the configuration menu.
Press a number from 1201~1208 followed by the # key to listen to the tone.
2
You can continue to add, listen to, or delete tones, or you can hang up the receiver
3
when you are done.
Do the following to delete a custom tone:
Pick up the phone and press **** on your phone's keypad and wait for the
1
message that says you are in the configuration menu.
Press a number from 1301~1308 followed by the # key to delete the tone of your
2
choice. Press 14 followed by the # key if you wish to clear all your custom tones.
You can continue to add, listen to, or delete tones, or you can hang up the receiver
3
when you are done.

10.3 QoS

Network traffic can be classified by setting the ToS (Type Of Service) values at the
data source (for example, at the WiMAX Modem) so a server can decide the best
method of delivery, that is the least cost, fastest route and so on.
Virtual Local Area Network (VLAN) allows a physical network to be partitioned into
multiple logical networks. Only stations within the same group can communicate
with each other.
User's Guide
Chapter 10 The Service Configuration Screens
119