Telnet - ZyXEL Communications MAX-207HW2 User Manual

Chapter 14 The Remote Management Screens
Table 56 TOOLS ( 工具 ) > Remote MGMT > WWW (continued)
LABEL
Apply ( 套用 )
Reset ( 重設 )

14.3 Telnet

Click TOOLS ( 工具 ) > Remote MGMT > Telnet to control Telnet access to your
WiMAX Modem.
Figure 62 TOOLS ( 工具 ) > Remote MGMT > Telnet
The following table describes the labels in this screen.
Table 57 TOOLS ( 工具 ) > Remote MGMT > Telnet
LABEL
Server Port
Server Access
Secured Client
IP Address
Apply ( 套用 )
Reset ( 重設 )
152
DESCRIPTION
Click to save your changes.
Click to restore your previously saved settings.
DESCRIPTION
Enter the port number this service can use to access the WiMAX
Modem. The computer must use the same port number.
Select the interface(s) through which a computer may access the
WiMAX Modem using this service.
Select All to allow any computer to access the WiMAX Modem using this
service.
Select Selected to only allow the computer with the IP address that
you specify to access the WiMAX Modem using this service.
Click to save your changes.
Click to restore your previously saved settings.
User's Guide