ZyXEL Communications MAX-207HW2 User Manual page 177

Chapter 18 Product Specifications
Table 66 Radio Specifications (continued)
Data Rate
Modulation
Output Power
Duplex mode
Security
Table 67 Firmware Specifications
FEATURE
Web-based Configuration
and Management Tool
High Speed Wireless
Internet Access
Firewall
Content Filtering
Network Address
Translation (NAT)
Universal Plug and Play
(UPnP)
178
Download:
Maximum 20 Mbps
Average 6 Mbps
Upload:
Maximum 4 Mbps
Average 3 Mbps
QPSK (uplink and downlink)
16-QAM (uplink and downlink)
64-QAM (downlink only)
Typically 26 dBm with internal antennas
Time Division Duplex (TDD)
PKMv2
EAP
CCMP, 128-bit AES
DESCRIPTION
Also known as "the web configurator", this is a firmware-
based management solution for the WiMAX Modem. You must
connect using a compatible web browser in order to use it.
The WiMAX Modem is ideal for high-speed wireless Internet
browsing.
WiMAX (Worldwide Interoperability for Microwave Access) is a
wireless networking standard providing high-bandwidth,
wide-range secured wireless service. The WiMAX Modem is a
WiMAX mobile station (MS) compatible with the IEEE 802.16e
standard.
The WiMAX Modem is a stateful inspection firewall with DoS
(Denial of Service) protection. By default, when the firewall is
activated, all incoming traffic from the WAN to the LAN is
blocked unless it is initiated from the LAN. The WiMAX
Modem's firewall supports TCP/UDP inspection, DoS detection
and prevention, real time alerts, reports and logs.
The WiMAX Modem can block access to web sites containing
specified keywords. You can define time periods and days
during which content filtering is enabled and include or
exclude a range of users on the LAN from content filtering.
Network Address Translation (NAT) allows the translation of
an Internet protocol address used within one network (for
example a private IP address used in a local network) to a
different IP address known within another network (for
example a public IP address used on the Internet).
Your device and other UPnP enabled devices can use the
standard TCP/IP protocol to dynamically join a network,
obtain an IP address and convey their capabilities to each
other.
User's Guide