Transponder Mode Selection - Garmin G1000 Pilot's Manual

TRANSPONDER MODE SELECTION

Mode selection can be automatic (Ground and Altitude Modes) or manual (Standby, ON, and Altitude Modes).
The STBY, ON , and ALT Softkeys can be accessed by pressing the XPDR Softkey.
Selecting a transponder mode:
1) Press the XPDR Softkey to display the Transponder Mode Selection Softkeys.
2) Press the desired softkey to activate the transponder mode.
GROUND MODE
Ground Mode is normally selected automatically when the aircraft is on the ground. The transponder
powers up in the last mode it was in when shut down. Ground Mode can be overridden by pressing any one
of the Mode Selection Softkeys. A green 'GND' indication and transponder code appear in the mode field of
the Transponder Data Box. In Ground Mode, the transponder does not allow Mode A and Mode C replies,
but it does permit acquisition squitter and replies to discretely addressed Mode S interrogations.
190-00595-00 Rev A
���� ��
� � � �
Figure 4-32 Transponder Softkeys
Figure 4-33 Ground Mode
Garmin G1000 Pilot's Guide for the Beechcraft A36/G36
����
��� ��� ����
� � � �
Press the IDENT or BACK Softkey to return
to the top-level softkeys.
AUDIO PANEL AND CNS
����� ���� ������
Press the BACK Softkey to return
to the top-level softkeys.
�����
���� ���� ������
GND
Mode
4-27