Garmin G1000 Pilot's Manual page 137

Creating user waypoints from the Navigation Map Page:
1) With the Navigation Map Page displayed, push the JOYSTICK to activate the panning function. The map arrow
is displayed at the present aircraft position.
2) After placing the map arrow at the desired position, press the ENT Key. The User Waypoint Information Page is
displayed with the captured position.
3) Enter a waypoint name.
4) Press the ENT Key to accept the selected name. The first reference waypoint field is highlighted.
5) If desired, enter the identifier of the reference waypoint and the radial and distance to the reference waypoint.
6) Press the ENT Key to accept.
7) Press the FMS Knob to remove the flashing cursor.
190-00595-00 Rev. A Garmin G1000 Pilot's Guide for the Beechcraft A36/G36
GPS NAVIGATION
5-19