Garmin G1000 Pilot's Manual page 83

Beechcraft a36/g36 integrated flight deck
Hide thumbs Also See for G1000:
Table of Contents

Advertisement

NAV VOL/ID Knob – Controls NAV audio volume level. Press to turn the Morse code identifier audio on
1
and off. Volume level is shown in the NAV frequency field as a percentage.
NAV Frequency Transfer Key – Transfers the standby and active NAV frequencies.
2
NAV Knob – Tunes the standby frequencies for the NAV receiver (large knob for MHz; small knob for kHz).
3
Press to move the tuning box (light blue box) and Frequency Transfer Arrow between NAV1 and NAV2.
NAV Frequency Box – Displays NAV standby and active frequency fields, volume, and station ID. The
4
frequency of the NAV radio selected for navigation is displayed in green.
COM Frequency Box – Displays COM standby and active frequency fields and volume. The selected COM
5
transceiver frequency is displayed in green.
COM Knob – Tunes the standby frequencies for the COM transceiver (large knob for MHz; small knob for
6
kHz). Press to move the tuning box (light blue box) and Frequency Transfer Arrow between COM1 and
COM2.
COM Frequency Transfer Key – Transfers the standby and active COM frequencies. Press and hold this key
7
for two seconds to tune the emergency frequency (121.500 MHz) automatically into the active frequency
field.
COM VOL/SQ Knob – Controls COM audio volume level. Press to turn the COM automatic squelch on
8
and off. Volume level is shown in the COM frequency field as a percentage.
DME Tuning Window – Displays DME frequency pairing mode. Display by pressing DME Softkey.
9
ENT Key – Validates or confirms DME pairing mode and Auto-tune selection.
10
FMS Knob – Flight Management System Knob, used to select DME modes and Auto-tune entries when
11
DME Tuning Window or NRST Window is present. Press the FMS Knob to turn the selection cursor on
and off. The large knob moves the cursor in the window. The small knob selects individual characters for
the highlighted cursor location.
Transponder Data Box – Indicates the selected transponder code, operating mode, reply, and ident status
12
for the transponder.
190-00595-00 Rev A
Garmin G1000 Pilot's Guide for the Beechcraft A36/G36
AUDIO PANEL AND CNS
4-3

Advertisement

Table of Contents
loading

Table of Contents