Garmin G1000 Pilot's Manual page 26

SYSTEM OVERVIEW
BRG2 Cycles the Bearing 2 Information Window through:
OFF
STD BARO Sets barometric pressure to 29.92 in Hg (1013 hPa if METRIC Softkey is selected)
• OBS Selects OBS Mode on the CDI when navigating by GPS (only available with active leg)
DCLTR-1
• CDI Cycles CDI through GPS, NAV1 (VOR/LOC), and NAV2 (VOR/LOC) navigation sources
• ADF/DME Displays/removes ADF/DME Radio Tuning Window (optional; may appear as ADF, DME, or
DCLTR-2
DCLTR-3
METRIC
• XPDR Displays transponder mode selection softkeys:
STBY Selects standby mode (Transponder does not reply to any interrogations)
ON Selects Mode A (Transponder replies to interrogations)
Selects Mode C – altitude reporting mode (Transponder replies to identification and altitude
ALT
VFR Automatically enters the VFR code (1200 in U.S.A. only)
CODE Displays transponder code selection softkeys 0-7
0 — 7 0 Use numbers to enter code
BKSP Removes numbers entered, one at a time
• IDENT Activates the Special Position Identification (SPI) pulse for 18 seconds, identifying the
• TMR/REF Displays/removes Timer/References Window
• NRST Displays/removes Nearest Airports Window
• ALERTS Displays/removes Alerts Window
1-16
INSET PFD OBS
INSET
NAV2: Waypoint frequency/identifier and DME information
GPS: Waypoint identifier and GPS distance information
ADF: Waypoint frequency
Off: Removes window
DCLTR TRAFFIC TOPO
ADF/DME depending on installation)
PFD
(optional)
DFLTS DME BRG 1
Figure 1-15 PFD Configuration Softkeys
STBY ON ALT
interrogations)
1 2 3 4
transponder return on the ATC screen
Garmin G1000 Pilot's Guide for the Beechcraft A36/G36
CDI ADF/DME XPDR IDENT
Press the CDI Softkey to cycle through
navigation sources:
- GPS
- NAV1 (VOR/LOC)
- NAV2 (VOR/LOC)
(optional) (optional)
TERRAIN NEXRAD XM LTNG
Press the OFF or BACK Softkey to
return to the top-level softkeys.
360 HSI ARC HSI BRG 2
Press the BRG1/BRG2 softkeys to display/
remove the Bearing Information windows
and cycle through bearing sources:
- NAV1/NAV2
- GPS
- ADF
Press the STD BARO or BACK Softkey
to return to the top-level softkeys.
XPDR
VFR CODE IDENT
Press the BACK Softkey to return
to the top-level softkeys.
5 6 7 IDENT
Press the IDENT or BACK Softkey
to return to the top-level softkeys.
TMR/REF NRST ALERTS
BACK ALERTS
STD BARO BACK ALERTS
BACK ALERTS
BKSP BACK ALERTS
190-00595-00 Rev. A