Lean Display - Garmin G1000 Pilot's Manual

EIS

3.3 LEAN DISPLAY

The pilot should follow the engine manufacturer's recommended leaning procedures in the POH.
NOTE:
The Lean Display is accessed by pressing the ENGINE Softkey followed by the LEAN Softkey. Engine
temperature parameters are shown to provide assistance during engine leaning.
Bars for cylinders whose exhaust gas and head temperatures are within the normal range are shown in white.
On the CHT Bar Graph, caution or warning conditions for each cylinder are indicated by color change of the bar
to yellow or red, respectively. By default, the cylinder with the hottest EGT and CHT is selected (bar indicated
in light blue) when the LEAN Softkey is pressed. The readouts below the bar graphs correspond to the selected
cylinder.
3-4
1
2
3
4
5
Figure 3-3 Lean Display
Garmin G1000 Pilot's Guide for Beechcraft A36/G36 190-00595-00 Rev. A