Direct-To-Navigation (Mfd); Selecting A Direct-To Waypoint - Garmin G1000 Pilot's Manual

5.4 DIRECT-TO-NAVIGATION (MFD)

The "direct-to" navigation feature provides a quick method of setting a GPS course to a destination waypoint.
Once a direct-to is activated, the G1000 establishes a point-to-point course line from the present position to
the selected direct-to destination. Course guidance is provided until the direct-to is cancelled or replaced by a
new destination.
Inset Map Showing
Direct-To Waypoint
Location
Bearing to Waypoint
from Present Position
The Direct-to Window Inset Map (Figure 5-18) range is adjustable. To change the map range, turn the
NOTE:
joystick to the left to select a lower range, turn it to the right to select a higher range.

SELECTING A DIRECT-TO WAYPOINT

A direct-to waypoint can be selected in the following ways:
• By identifier, facility, or the name of a city
• From the active flight plan or nearest airports list
• From a waypoint field, waypoint page, or highlight shortcut
190-00595-00 Rev. A
Flight Plan/Nearest
Waypoints
Distance to Waypoint
from Present Position
Figure 5-18 MFD Direct to Window
Garmin G1000 Pilot's Guide for the Beechcraft A36/G36
GPS NAVIGATION
Direct-To Waypoint
Identifier, Facility,
Symbol, City
Direct-To Waypoint
Location
Direct-To Waypoint
Position
Activate Annunciation
5-27