Garmin G1000 Pilot's Manual page 39

Enabling/disabling an arrival alert:
1) Use the FMS Knob to select the System Setup Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to select the ON/OFF field in the Arrival Alert Box.
4) Turn the small FMS Knob clockwise to turn the airspace alert ON or counterclockwise to turn the alert OFF.
Changing the arrival alert trigger distance:
1) Use the FMS Knob to select the System Setup Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the distance field in the Arrival Alert Box.
4) Enter a trigger distance and press the ENT Key.
A A
UDIO LERTS
The Audio Alert Box on the System Setup Page allows the audio alert voice to be set to male or female.
Changing the audio alert voice:
1) Use the FMS Knob to select the System Setup Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the voice in the Audio Alert Box.
4) Turn the small FMS Knob to display and highlight the desired voice.
5) Press the ENT Key.
MFD D
ATA
The MFD Data Bar Fields Box on the System Setup Page can be used to change the configuration of
the data fields in the Navigation Status Box on the MFD. By default, the Navigation Status Box is set to
display ground speed (GS), distance to next waypoint (DIS), estimated time enroute (ETE), and enroute
safe altitude (ESA). The Navigation Status Box on the PFD is not affected.
The following data may be selected for display in the four fields of the MFD Navigation Status Box.
• Bearing (BRG)
• Distance (DIS)
• Desired Track (DTK)
• Enroute Safe Altitude (ESA)
• Estimated Time of Arrival (ETA)
• Estimated Time Enroute (ETE)
190-00595-00 Rev. A
B F
AR IELDS
Garmin G1000 Pilot's Guide for the Beechcraft A36/G36
SYSTEM OVERVIEW
• Ground Speed (GS)
• Minimum Safe Altitude (MSA)
• Track Angle Error (TKE)
• Track (TRK)
• Vertical Speed Required (VSR)
• Crosstrack Error (XTK)
1-29