Direct-To Navigation Shortcuts Using The Fms Knob - Garmin G1000 Pilot's Manual

GPS NAVIGATION

DIRECT-TO NAVIGATION SHORTCUTS USING THE FMS KNOB

Selecting a Direct-to Destination to a Flight Plan Waypoint:
1) While navigating an active flight plan, press the Direct-to (
2) Turn the small FMS Knob to the left to display a list of flight plan waypoints as shown in Figure 5-25.
3) Turn the large FMS Knob to select the desired waypoint.
4) Press the ENT Key. The cursor is now displayed on 'ACTIVATE?'.
5) Press ENT again to activate a Direct-to.
Selecting a Direct-to Destination to a Nearest Airport:
1) Press the Direct-to (
2) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list is displayed as in Figure 5-26. The list
is populated only when navigating a flight plan.
3) Turn the small FMS Knob to the right to display the 'NRST' airports to the aircraft's current position as shown in
Figure 5-26.
4) Turn the large FMS Knob to select the desired airport.
5) Press the ENT Key. The cursor is now displayed on 'ACTIVATE?'.
6) Press ENT again to activate a Direct-to.
5-32
Figure 5-25 Flight Plan Waypoint List (MFD)
) Key.
Figure 5-26 Nearest Airport List (MFD)
Garmin G1000 Pilot's Guide for the Beechcraft A36/G36
) Key.
190-00595-00 Rev. A