Table of Contents
Advertisement
10
EXHAUST
87
Main work
(EXC EUiAUS, EXC SIX DAYS)
-
Remove screws
of connecting cap
-
Take off the connecting cap with the perforated pipe, a-ring
,and glass fiber
yarn filling
-
Remove screws
and take off silencer cap
with a-ring
and stuffing
yarn
-
Clean the parts that need to be reinstalled and check for damage.
-
Mount the a-ring on the silencer cap.
-
Mount the new stuffing yarn on the silencer cap and fasten with adhesive tape.
-
Position the silencer cap. Mount and tighten the screws.
-
Mount the a-ring on the connecting cap.
-
Slide the new glass fiber yarn filling over the perforated pipe.
-
Mount the connecting cap with the glass fiber yarn filling in the main silencer.
•
Info
I
Slide the glass fiber yarn filling into the main silencer with a blunt tool.
-
Mount and tighten the screws.
(EXC USA, XC-WJ
-
Remove screws
of connecting cap
-
Take off the connecting cap with the perforated pipe, a-ring
and glass fiber
yarn filling
-
Remove screws
and silencer cap
with a-ring
-
Remove screw
and remove insert
together with stuffing yarn
-
Clean the parts that need to be reinstalled and check for damage.
-
Mount the new stuffing yarn on the insert and fasten with adhesive tape.
Slide the insert with the stuffing yarn into the main silencer and fasten with the
screw.
-
Mount the a-ring on the connecting cap.
-
Slide the new glass fiber yarn filling over the perforated pipe.
-
Mount the connecting cap with the glass fiber yarn filling in the main silencer.
•
Info
I
Slide the glass fiber yarn filling into the main silencer with a blunt tool.
-
Mount and tighten the screws.
-
Mount the a-ring on the silencer cap.
-
Position the silencer cap. Mount and tighten the screws.
Finishing work
-
Install the main silencer.
(r
p. 86)
Advertisement
Table of Contents
