21
LUBRICATION SYSTEM
Preparatory work
(EXC SIX DAYS, EXC AUS)
-
Remove the engine guard. (
..
p. 61)
-
Park the motorcycle on a level surface.
Main work
-
Place a suitable container under the engine.
-
Remove oil drain plug
with the magnet and seal ring.
-
Remove screw plug
with the gear oil screen and the O-rings.
•
Info
I
Do not remove screw
-
Remove screw plug
with engine oil screen
and the O-rings.
-
Completely drain the engine oil.
-
Thoroughly clean the parts and sealing surfaces.
-
Mount and tighten screw plug
with the gear oil screen and the O-rings.
Guideline
Screw plug, gear oil screen
M20x1.5
-
Push the engine oil screen with the O-rings onto a pin wrench.
15 Nm
(ll.llbfft)
205
-
Push the pin wrench through the opening into the drill hole of the opposite engine
case wall and push the oil screen as far as possible into the engine case.