Greasing The Steering Head Bearing; Removing The Lower Triple Clamp - KTM 450 EXC EU 2013 Repair Manual

Hide thumbs Also See for 450 EXC EU 2013:
Table of Contents

Advertisement

6
FORK, TRIPLE CLAMP
53
Guideline
Rebound damping
Comfort
20 clicks
Standard
18 clicks
Sport
18 clicks
Compression damping
Comfort
24 clicks
Standard
22 clicks
Sport
16 clicks
-
Turn counterclockwise by the number of click specified for the fork type.
Alternative 2
-------------------------------------
Warninl
Danler of accidents
Modifications to the suspension settings can seri-
ously alter the vehicle's ride behavior.
-
Extreme modifications to the adjustment of the suspension compo-
nents can cause a serious deterioration in the handling characteris-
tics and overload some components.
-
Only make adjustments within the recommended range.
-
After making adjustments, ride slowly at first to get the feel of the
new ride behavior.
-
Set the adjusters to the positions determined upon removal.
6.2.24
Graasinl the stearinl head bearinl
~
8
i····
800010-10
6.2.25
RellovlDi the lower triple clamp
-
Remove the lower triple clamp.
(--
p. 53)
-
Install the lower triple clamp.
(--
p. 54)
Preparatory work
-
Remove the headlight mask with the headlight.
(--
p. 99)
-
Raise the motorcycle with the lift stand.
(--
p. 12)
-
Remove the front wheel.
(--
p. 103)
-
Remove the fork legs.
(--
p. 37)
-
Remove the front fender.
(--
p. 99)
-
Remove the handlebar cushion.
Main work
-
Open the cable holder in front of the right radiator and detach the wiring harness.
-
Remove screws
and hang the voltage regulator to the side.
-
Remove screw
. Remove screw
, take off the upper triple clamp with the han-
dlebar and set it aside.
Info
I
Protect the motorcycle and its attachments against damage by covering
them.
Do not bend the cables and lines.

Advertisement

Table of Contents
loading

Table of Contents