13
MASK, FENDER
99
-
Remove screws
. Remove the front fender.
-
Make sure the spacers remain in place.
-
Ensure that the spacers are mounted in the fender.
-
Position the front fender. Mount and tighten screws
Guideline
I
Remaining screws, chassis
110
Nm (7.4 Ibf
ftl
1
•
Info
I
Make sure the holding lugs engage in the start number plate or headlight
mask.
-
Switch off all electrical equipment.
-
Remove screw
and take off clamp.
-
Loosen the rubber band
. Push up the headlight mask and swing it forwards.
-
Pull out the electric plug connector
and remove the headlight mask with the
headlight.
Rlfillinllhl hladliKfJI mask with Ihl hlldliKfJI
Main work
-
Connect the electric plug connector