Table of Contents
Advertisement
15
WIRING HARNESS, BATTERY
116
Preparatory work
-
Switch off all power consumers and switch off the engine.
-
Remove the seat.
(
e-
p. 90)
-
Disconnect the negative cable of the battery to avoid damage to the onboard elec-
tronics.
Main work
-
Connect the battery charger to the battery. Switch on the battery charger.
I
Battery charger (58429074000)
You can also use the battery charger to test the open-circuit voltage and starting
voltage of the battery, and to test the alternator. With this device, you cannot over-
charge the battery.
•
Info
I
Never remove lid
Charge the battery with a maximum of 10% of the capacity specified on
battery housing
-
Switch off the battery charger after charging. Disconnect the battery.
Guideline
The charge current, charge voltage, and charge time must not be exceeded.
Charge the battery regularly when the
13
months
motorcycle is not in use
Finishinl work
-
Mount the seat.
(e-
p. 91)
Advertisement
Table of Contents
