6
FORK, TRIPLE CLAMP
200728-10
200665-10
200666-10
-
Check the inner tube and axle clamp for damage.
•
If there is damage:
-
Change the inner tube.
-
Measure the outside diameter at several locations on the inner tube.
Outside diameter of the inner tube
47.975 ... 48.005 mm (1.88878 ...
1.88996 in)
•
If the measured value is below the specified value:
-
Change the inner tube.
-
Measure the run-{lut of the inner tube.
Iinner tub run-out
I ,; 0.20 mm (,; 0.0079 in)
•
If the measured value is greater than the specified value:
-
Change the inner tube.
-
Check the outer tube for damage.
•
If there is damage:
-
Change the outer tube.
-
Check the surface of the sliding bushing.
•
If the bronze-colored layer
under the sliding layer
is visible:
-
Replace the sliding bushing.
-
Check the spring length.
Guideline
Spring length with preload spacer(s)
Weight of rider: 65 ... 75 kg (143 ...
513 mm (20.2 in)
165 lb.)
Weight of rider: 75 ... 85 kg (165 ...
513 mm (20.2 in)
187 lb.)
Weight of rider: 85 ... 95 kg (187 ...
513 mm (20.2 in)
209 lb.)
24