Web Server Commands; Ip Http Port; Table 4-12. Web Server Command - SMC Networks 8124PL2 - annexe 1 Management Manual

Command Mode
Privileged Exec
Example
Console#show management all-client
Management Ip Filter
Http-Client:
Start ip address
-----------------------------------------------
1. 192.168.1.19
2. 192.168.1.25
Snmp-Client:
Start ip address
-----------------------------------------------
1. 192.168.1.19
2. 192.168.1.25
Telnet-Client:
Start ip address
-----------------------------------------------
1. 192.168.1.19
2. 192.168.1.25
Console#

Web Server Commands

Command

ip http port

ip http server
ip http secure-server
ip http secure-port
ip http port
This command specifies the TCP port number used by the web browser interface.
Use the no form to use the default port.
Syntax
ip http port port-number
no ip http port
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
Default Setting
80
End ip address
192.168.1.19
192.168.1.30
End ip address
192.168.1.19
192.168.1.30
End ip address
192.168.1.19
192.168.1.30

Table 4-12. Web Server Command

Function
Specifies the port to be used by the web browser interface GC
Allows the switch to be monitored or configured from a
browser
Enables HTTPS/SSL for encrypted communications
Specifies the UDP port number for HTTPS/SSL
System Management Commands
4
Mode Page
4-29
GC 4-30
GC 4-30
GC 4-31
4-29