Operating Procedure Of The Sewing Pattern - JUKI DDL-7000A-7 Series Instruction Manual

3. Operating procedure of the sewing pattern

(1) Reverse feed stitching pattern
Reverse feed stitching at sewing start and reverse feed stitching at sewing end can be separately pro-
grammed.
I
J


[Setting procedure of the reverse feed stitching]
1) The reverse feed stitching pattern at the beginning
of sewing can be changed over to "enable / dou-
ble reverse feed stitching / disable" by pressing
 .
❻ - 
The reverse feed stitching pattern at the end of
sewing can be changed over to "enable / double
reverse feed stitching / disable" by pressing
 . The current setting state of the reverse feed
stitching is displayed on the display section I and J.
2) Change the number of stitches to be sewn in tar-
get process (A, B, C, D) with
The number which exceeds 9 is indicated
as follows:
A = 10, b = 11, c = 12, d = 13, E = 14, and F
= 15.
– 21 –
❻ to  .