Cleaning The Cooking Chamber Manually; Preparing The Cooking Chamber; Starting The Cleaning Program; Spraying The Cleaner - Henny Penny FlexFusion Spacesaver Operation Manual

Hide thumbs Also See for FlexFusion Spacesaver:
Table of Contents

Advertisement

Cleaning and caring for the unit

6.12 Cleaning the cooking chamber manually

6.12.1 Preparing the cooking chamber

NOTICE
Prerequisite GN containers, baking sheets and grates removed from the cooking

6.12.2 Starting the cleaning program

Prerequisite Unit is on

6.12.3 Spraying the cleaner

CAUTION
NOTICE

6.12.4 Allowing the cleaner to act

92
Risk of property damage from improper cleaning
• Do not clean the unit with a high-pressure cleaner or water jet.
chamber
1. Remove any food remains from the cooking chamber.
The drainage sieve is not obstructed.
2. Leave only the support rack in the cooking chamber.
3. Close the cooking chamber door.
Tap Manual cleaning.
Dangerous situation
Failure to observe precautions can result in slight to moderately severe in-
juries.
• Wear protective clothing.
• Wear breathing protection.
Risk of property damage from exceeding the recommended acting
time of the cleaner
• Do not allow the cleaner to act longer than specified by the program.
1. The menu field displays the instruction "Spray cleaner"
2. Put on protective clothing, safety goggles and protective gloves
3. Open cooking chamber door.
4. Spray the cooking chamber, heat register and fan wheel with
cleaner.
Close the cooking chamber door.
The acting time starts.
The display shows the remaining time until the "Flush cooking
chamber" stage.
Operating instructions

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfusion spacesaver plusFsde 610.610

Table of Contents