Using The Barcode Scanner; Inserting And Removing The Usb Stick - Henny Penny FlexFusion Spacesaver Operation Manual

5.6.18 Using the barcode scanner

Requirements Barcode scanner connected

5.6.19 Inserting and removing the USB stick

Prerequisite USB stick with a minimum of 2 GB and maximum of 32 GB available
Prerequisite Exporting or importing of data completed
2. Wait until the cooking time ends.
Heating of the unit is ended.
The "Stopp" button is replaced with the "Start" button.
The cooking time is reset.
LT cooking is ended.
b
Image: Window for selecting the barcode scanner
a Barcode scanner button
Manual cooking field selected
1. Tap the "Barcode scanner" button.
2. Read the barcode.
A search for the product commences.
The cooking program is loaded.
The Barcode Scanner function is utilized.
Inserting the USB stick
storage capacity (not included with delivery)
USB stick not write-protected
Insert the USB flash drive.
The USB stick is ready after at most 20 seconds.
Removing the USB stick
Remove the USB stick.
Operating instructions
a
b Product field
Operating the unit
63