Entering A Poi Via The Map - Mercedes-Benz COMAND Operator's Manual

ZAGAT example description

Entering a POI via the Map

i
If the crosshairs are visible on the map, you
can enter POIs in the vicinity of the crosshairs.
If the crosshairs are not visible, you can enter
POIs in the vicinity of the current vehicle loca-
tion.
In the map display with the menu sys-
tem displayed ( page 53) select
POIs are available:
Depending on the map scale selected,
POI symbols are displayed on the map.
The scale starting at which symbols are
displayed on the map varies from sym-
bol to symbol.
You can select which symbols
COMAND should display ( page 56).
The POI nearest to the center of the
screen is selected automatically.
No POIs available:
A corresponding message is displayed.
i
This message is also displayed if the menu
item No Symbols under Map Display has been se-
lected ( page 56).
To confirm message: Press C.
Guide
.
1 Information about the highlighted POI
2 Highlighted POI
To select a POI: Select
To display details on the selection:
Details
Select .
To start route calculation: Select
Start
, see also ( page 70).
You will be asked whether the POI
should be adopted as the destination.
Yes No
Select or .
Route calculation starts if
ed; a new POI can be chosen if
lected.
Navigation
POI Input
Next Previous
or .
Yes
is select-
No
is se-
83