Mercedes-Benz COMAND Operator's Manual page 61

Navigation
Introduction
Current Street
Map with road display activated
1 Road name or road number, e.g. for
highways
Geo-coordinates Display
Map with geo-coordinates display activated
1 Current height above sea level
2 Coordinates display of the current vehi-
cle location (latitude)
3 Coordinates display of the current vehi-
cle location (longitude)
4 Number of GPS satellites currently be-
ing used
60
i
Adequate GPS reception must be available
for all displays. The altitude display 1 may differ
from reality because the navigation system cal-
culates it using the GPS signals.
i
In the "Move map" function the displays 1
and 4 are not displayed. The geo-coordinate
position of the crosshairs is displayed.
"None" Menu Option
Map with display switched off
1 Currently set map orientation
i
In the "Move map" function you will see oth-
er data depending on the crosshairs position, for
example a road name if the digital map supports
this data.
Highway Information
When driving on highways, you can have
the next gas stations, service areas, etc. as
well as the distance to them displayed in
the right-hand half of the screen.
To set: Display menu system if applica-
ble ( page 53).
Navi Highway Information
Select
£
Depending on the previous status, the
function will be switched off C or on D.
Example display: Function on
1 Information type: Rest area
2 Name of rest area
3 Distance from the current vehicle loca-
tion
.