Mercedes-Benz COMAND Operator's Manual page 65

Navigation
Destination Input
i
In the predictive speller 8 you can only se-
lect characters 7 that are currently available.
The characters that are available depends on
those already entered and the data for the digital
map.
When entering characters, the list entry 3
always displays a city that best matches
the characters already entered.
COMAND automatically adds matching let-
ters 2 to those characters 1 already en-
tered by the user.
Entering characters
To select characters: Press ( or
&.
Press % or $ to switch between
the lines in the speller.
To confirm character selection:
Press C.
Alternatively, you can enter characters us-
ing the number keypad (direct input).
Example:
Press one of the number keys, e.g.
2, once or repeatedly in succes-
sion.
64
After you have pressed it the first time,
the character display appears at the
lower edge of the display. The first
available letter is highlighted.
You see which characters you can enter
with that key. Each time you press the key,
the next character is highlighted.
For example, key 2:
Press once = A
Press twice = B
Press three times = C
Wait until the character display goes out.
Deleting an entry
To delete individual characters: Se-
lect õ at the bottom right of the
speller and press C.
or
Press the î button.
To delete an entire entry:
Select õ and press and hold C un-
til the entire entry has been deleted.
or
Press and hold î until the entire en-
try has been deleted.
Cancelling an entry
Select A at the bottom left of the
speller and press C.
or
Press the í button.
The Enter Destination menu appears.