Mercedes-Benz COMAND Operator's Manual page 80

When entering characters, the list entry
always displays a category that best
matches the characters already entered.
COMAND automatically adds matching let-
to those characters 2 already en-
ters 3
tered by the user.
Entering characters
To select characters: Press ( or
&.
Press % or $ to switch between
the lines.
To confirm character selection:
Press C.
Deleting an entry
To delete individual characters: Se-
lect õ at the bottom right of the
speller and press C.
or
Press the î button next to the cur-
sor buttons.
To delete an entire entry: Select )
and press and hold C until the entire
entry has been deleted.
or
Press and hold î until the entire en-
3
try has been deleted.
Cancelling an entry
Back
Select at the bottom left of the
speller and press C.
or
Press the í button.
The previous menu appears.
Accepting first list entry
Press and hold C until the list appears
without speller.
or
If COMAND can match the characters en-
tered definitively to one entry, the list ap-
pears automatically without the speller.
Navigation
Switching to the main category list with-
out predictive speller
You can switch to the list at any point while
entering characters.
Press $ repeatedly until the list ap-
pears without the speller.
or
Select B and press C.
Main category list without predictive
speller
Example: Main category list for POIs in the
vicinity of the location
1 Selected main category
POI Input
79