Mercedes-Benz COMAND Operator's Manual page 216

Say the commands without pausing
between individual words. If you enter a
command that does not exist or is incor-
rect, the voice control system asks you for
a new command with "Please repeat" or
"Please repeat your entry!".
The voice control confirms important com-
mands to you and gives you instructions in
the event of incorrect entries.
Command Types
Voice control distinguishes between the
following types of command:
Global commands:
These are commands which can be
called up at any time (e.g. help or
phone commands).
Local commands:
These are commands which are only
available for the active application (e.g.
"Enter destination" during navigation).
Active Application
The local commands refer to the applica-
tion currently shown on the display and to
the audio source you are currently listen-
ing to.
For example, if you are listening to the ra-
dio while the navigation application is ac-
tive on the display, you can operate both
applications using voice control.
To operate a different function using voice
control, you must first switch to that appli-
cation using the corresponding command.
Operating Voice Control
Vehicles with Voice Control buttons on
the Multi-function Steering Wheel
Example display: M-Class
1 !
Activates voice control
2 L
Cancels voice control
3 ç
Decreases the volume
æ
Increases the volume
Voice Control
i
You can cancel the dialog with voice control
at any time.
Voice control is operational around half a
minute after COMAND is switched on.
Vehicles with Lever for Voice Control
Example display: SL-Class
1 º
Cancels voice control
2 ¸
Activates voice control
3 ç
Decreases the volume
æ
Increases the volume
Overview
215