Mercedes-Benz COMAND Operator's Manual page 49

Navigation
Introduction
Loading DVD into DVD Changer
The 6-disc DVD changer is integrated with
COMAND.
1 Load/Eject button
2 Disc slot
48
Press the Load button .
A disc icon indicates which magazine
compartments are currently loaded.
To select an empty magazine com-
partment: Press ( or &.
To start loading: Press C.
Please Insert Disc <x>
The message
then be displayed.
Insert the disc into the slot with the
printed side upwards.
The DVD changer pulls in the disc. The
Loading Disc <x>...
message
played.
i
If the magazine is full, you will first need to
eject a disc ( page 152).
Update Process
The update process starts once the DVD
has been loaded.
COMAND checks whether the map soft-
ware on the DVD matches the vehicle's
navigation system and system software.
Map software is not suitable for the
will
navigation system or the system soft-
ware
A message is displayed stating that the
navigation update DVD with the new map
data is not suitable for the system or the
will be dis-
system software.
COMAND ejects the DVD.
Remove the DVD from the slot.
Have the system software updated by
an authorized Mercedes-Benz Center.
i
It will only be possible to update the map
software once the system software has been up-
dated.
Map software matches the navigation
system and the current system software
COMAND checks whether the DVD's map
data has already been installed.