Mercedes-Benz COMAND Operator's Manual page 71

Navigation
Destination Input
1 List entry that best matches the
characters already entered
2 List
3 Predictive speller
i
In the predictive speller 3 you can only se-
lect characters that are currently available. The
characters that are available depends on those
already entered and the data for the digital map.
For the steps of
Entering characters
Deleting an entry
Accepting first list entry
Cancelling an entry
Switching to the list without predic-
tive speller
proceed as described under "City list
with predictive speller" ( page 63).
70
Junction list without predictive speller
To select a junction: Press % or
$.
To cancel selection: Select
press C.
or
Press the í button.
To confirm selection: Press C.
After the confirmation, the Enter Desti-
nation menu appears again. COMAND
has accepted the selected junction and
entered it automatically in the Enter
Destination menu. Now you can start
the route calculation ( page 70).
Starting Route Calculation
i
Route calculation can only be started once
all the necessary address data has been en-
tered.
In the Enter Destination menu select
Start
.
Back
and
1 Destination
2 Starts route calculation and then starts
route guidance
If route guidance is not active yet, the
route calculation is started.
If route guidance is already active, you
will be prompted to confirm that route
guidance should be ended.
Yes
Select or
No
.